Hoje mexendo um pouco no meu RT6 me deparei com a tela abaixo:
Procurei na internet e achei uns códigos que tenho medo de usar... mas se alguém souber de mais alguma informação passa ai...
BT;ECHO; BT;ECHO; | Tune BT Echo filter Set Block delay for eVoice lib: 0<delay<160
BT;GAIN; BT;GAIN; | Tune BT audio gain Set BT far ampl volume for eVoice lib: 0<value<30
BT;NOISE; BT;NOISE;| Tune BT Noise filter Set Noise Reduction attenuation for eVoice lib: 2<atten<20
HWINFO;S; HWINFO;S;| HWINFO_SYSTEM refresh time in secs (=0 stop,=empty automatic)
HWINFO;T; HWINFO;T;| HWINFO_RADIO refresh time in secs (=0 stop,=empty automatic)
SPYCLN SPYCLN | Delete previous stored spies
ALLCID ALLCID | Permit the continent upgrade (upgrade carto type DVD)
ARKBYP ARKBYP | Activate Arkamys bypass functionality
AVRIMG AVRIMG;n | Define the AVR backgroung image number
BTSTARTER; BTSTARTER;n | To activate it or not: 'BTSTARTER;1' or 'BTSTARTER;0'
BT0DB BT0DB | Permit the PBA component to generate a constant signal (0 dBm @ channel 39 (2441 MHz)
CARLOC; CARLOC; | CAR_LOCATION X#Y#Z
CARTOVER CARTOVER | Show Carto version
CDEJ CDEJ | Force ejection of CD
CLNMEM CLNMEM | PURGE_FLASH (erase all user_data)
FBOOT; FBOOT; | Next Start with first boot condit.(=1 one time, =7 permanent)
LDDELAY; LDDELAY; | LD_DELAY Wait a delay x before load module y in seconds
LOADER LOADER | FORCE_LOADER Reboot in loader mode
SDICLN SDICLN | Erase all data from SDI: SPY, User_data and TurboBoot infos
SIMNAV; SIMNAV; | ONOFF_SIMU_NAV 1 (speed) < value < 20 (slow)
TPEG; TPEG; | Permit the TPEG activation (0=OFF - 1=ON) on next reboot
UPG UPG | Force to upgrade
VER VER | VERALL and VERDBG
SABTA; SABTA; | Save BT A2DP data (=1 enable =0 disable)
CATCLN CATCLN | Erase /SDI/Catalog
##2386# ##CFUN# | ON Stack GSM 0 -> STOP, 1 -> START
##2763 ##CPOF | OFF Stack GSM
##28232# ##BTADC# | Set ADC gain for BT : ##BTADC#sign(P(6)=plus, M(7)=moins)#value(-54;+12)
##28322# ##BTDAC# | Set DAC gain for BT : ##BTDAC#sign(P(6)=plus, M(7)=minus)#value(-102;+24)
##283536# ##BTFLEN#| set filter length for echo compensation filter: 1<len<511
##286633# ##BTMODE#| set eVoice lib mode (31=all, 27=all except nr,...)
##287283# ##BTSAVE#| save or not mic_in, mic_out and echo_in signals on HDD (1 = save, 0= do not save)
##32#264# ##EC# | SET_EC_CONFORT_NOISE_ADJUST
##32#2641# ##EC# | SET_EC_CONFORT_NOISE_PARAM_1
##32#2642# ##EC# | SET_EC_CONFORT_NOISE_PARAM_2
##32#2644# ##EC# | SET_EC_CONFORT_NOISE_GAIN
##32#281# ##EC#CT1#| SET_EC_CONVERGENCE_TIME_1
##32#282# ##EC#CT2#| SET_EC_CONVERGENCE_TIME_2
##32#32# ##EC#EC# | STRING_ECHO_CANCELLATION_VALUE
##32#38# ##EC#DT# | SET_EC_DETECTION_THRESHOLD
##32#54# ##EC#LG# | STRING_ECHO_CANCELLATION_LENGTH
##32#63# ##EC#OF# | STRING_ECHO_CANCELLATION_OFF
##32#65# ##EC#NL# | SET_EC_NOISE_LEVEL
##32#66# ##EC#ON# | STRING_ECHO_CANCELLATION_ON
##32#67# ##EC#NR# | STRING_NOISE_REDUCTION_VALUE
##32#7# ##EC#S# | SET_EC_SOM_VALUE
##32#7283 ##EC#SAVE| SET_EC_SAVE
##32#78# ##EC#ST# | SET_EC_SIDE_TONE
##397628 ##EXPNAV | Export data by serail link for send_loc and adas prot (0 = proto type, 1 = param)
##42668# | STRING_MIC_GAIN_CONTROLER
##474# ##GPH# | GPH ##GPH#0#2 for vehicle (BR) ##GPH#0#5 for bench
#4#538# | SET_VGT_VALUE
##562722 ##LOCQ22 | LOC_Q2_2002 #1 Chatellerault #2 Paris
##628229# ##NAV | NAV_BLACK_BOX
##62897 NAVWP | Choose if we pass near Way Points or through Way Points (0 = through, 1 = near)
##722738# | DVD_REGION_CODE_ATTEMPTS
##724# | SET_MIC_ADC_VALUE
##734# | SET_MIC_DAC_VALUE
##734263# ##REGCOD#| DVD_REGION_CODE
##777326 ##SPRECO | SPEECH_RECOGNITION
##778378# ##SPTEST | SPEECH_RECOGNITION_TEST
##7792886# | NAV_SPY
##779347 ##SPYDIS | SPY_DIS
##779362 ##SPYENA | SPY_ENA
##779476 ##SPYGSM | SPY_GSM
##884296 ##VTH2Z6 | VTH_TO_Z6
Abraco,
